Swiss Catamaran Concept 55 te koop
€ 1.833.333
Oude prijs: € 2.470.000
excl. BTW
Gereduceerd
1 / 39
Details
Boot-ID
s255916
Boot-type
Boot categorie
zeilcatamaran
Model
Swiss Catamaran Concept 55
Boot-fabrikant
Technische gegevens
Lengte
16,95 m (56 voet)
Breedte
8,32 m (27,3 voet)
Diepgang
1,20 m (3,9 voet)
Aantal WC's
2
motor
motor 1
Model
Yanmar
Motorvermogen
80 PK (59 kW)
Motortype
binnenboord-motor
Brandstof
diesel
motor 2
Model
Yanmar
Motorvermogen
80 PK (59 kW)
Motortype
binnenboord-motor
Brandstof
diesel
Uitrusting
acculader, airconditioning, generator, zonne-energie
gangway
diepvries, koelkast, oven
genua, grootzeil, stormfok
Beschrijving
CAP MED BOAT & YACHT CONSULTING is pleased to present for sale this magnificent Swiss Cat 55 catamaran, a new semi-custom model designed by French naval architect François PERUS of Yacht Design Collective and built by Italian manufacturer Top Marine Costruzione. A fast blue-water cruising boat.
Main features:
Daggerboards for better upwind ability, less wetted surface and greater safety.
Two steering wheels for better visibility under sail and for maneuvering in tight spaces.
Luxurious, warm wood interior with balsa core.
Only three female molds were used for the entire hull, deck and roof.
After thorough finite element analysis, the hull lamination consists of an E-glass skin, a SAN-based Gurit Corecell M foam core, epoxy resin, post-cure, including primary bulkheads in laminated carbon fiber prior to demolding. Carbon fiber is used in high-load areas, including longitudinal spars, spars and bows, daggerboard junctions and front crossmembers.
Contact: Anthony CEGRI on 07 81 62 18 65 - 0033 781 621 865
Main features:
Daggerboards for better upwind ability, less wetted surface and greater safety.
Two steering wheels for better visibility under sail and for maneuvering in tight spaces.
Luxurious, warm wood interior with balsa core.
Only three female molds were used for the entire hull, deck and roof.
After thorough finite element analysis, the hull lamination consists of an E-glass skin, a SAN-based Gurit Corecell M foam core, epoxy resin, post-cure, including primary bulkheads in laminated carbon fiber prior to demolding. Carbon fiber is used in high-load areas, including longitudinal spars, spars and bows, daggerboard junctions and front crossmembers.
Contact: Anthony CEGRI on 07 81 62 18 65 - 0033 781 621 865
Uw e-mail is verstuurd.
€ 1.833.333
Oude prijs: € 2.470.000
excl. BTW
Uw e-mail is verstuurd.
Verkoper
132 Avenue Maurice Chevalier
06150 Cannes
Frankrijk
06150 Cannes
Frankrijk
